I needed somewhere to set up a ‘cold working” area. Grinding, polishing and engraving with glass requires the necessary tools and that vital element, water. I set up a bench using a couple of “A” frames and a board, and then set about figuring out a water supply. I didn’t want to plumb in a water supply but I found a camping water container with a tap and I fixed a hook into the wall and hung the water container from it. However the weight of the water pulled the container out of shape. I needed to find something to hold the container securely. I found a small wooden fishing stool, which had been used as a bedside table in the guest room, and that was attached to the hook and the container sat comfortably on the opened seat.
The next thing was to attach a hose so that the water could be directed towards the working area. I got clear plastic hose and ear defenders and pushed the hose through one of the ear plugs. This was plugged into the tap of the container perfectly without any leaks. I am able to control the amount of water for any cold working that I need to do.
The bench has a grinder, a Dremel multi-tool, a light source, a large magnifying glass and various grits and polishes for hand lapping.
Unfortunately I am now unable to close the studio door, but at last I can now experiment with the Dremel.